TAKE ACTION
a
M
TAKE ACTION
10 Ways to Progress Your Workouts (Without Adding Weight)

10 Ways to Progress Your Workouts (Without Adding Weight)

by | Jan 26, 2025 | Blog, Exercises, Functional Fitness, Workouts

Weights are not the only way to progress your workouts and build strength and muscle.

And the more advanced an exerciser you are, the more you have to even turn to other forms of progression in our workouts to keep seeing results.

These tips are helpful too when training at home or traveling to help you create that challenge to build.

So whether you’re finding yourself stuck at the loads you’re currently using, don’t have heavier weights available or simply need to challenge yourself through the same but different, these 10 forms of progression will help.

#1: Combine Equipment.

Different forms of resistance work in different ways.

Combining two tools can not only help you add resistance when you don’t have a clearly heavier weight but also take advantage of the different ways tools challenge you.

Try combining a band with your dumbbell exercise.

This way you not only have the weight of the dumbbell, but the challenge of the band that increases as it is stretched and forces you to control and decelerate as it shortens.

You’ll be surprised by how even a light band exponentially increases the challenge.

You’ll even find this can emphasize or activate different muscles to a greater extent. Like on a single leg deadlift, you may be surprised by how much more you are able to engage that glute!

#2: Adjust The Range Of Motion.

Changing up the range of motion we are working through can help us challenge our body in different ways.

By shrinking the range of motion and doing more pulses with an exercise, we can spend more time under tension.

This can really isolate a muscle to work it to fatigue.

We can even work muscles under differing amounts of stretch to not only build muscle but address weaker links or areas in the movement.

And pulses can be combined with moves that work the same muscles through the full range of motion to take muscles closer to fatigue when we don’t have heavier weights.

We can also increase the range of motion for exercises to increase the difficulty of a move and load the muscle under greater stretch.

Loading a muscle through a greater stretch has been shown to not only improve muscle gains but also helps you really create stability and strength through a full range of motion so that you mobility work truly pays off!

#3: Create Instability.

When we think about making a move more unstable, we may go straight to adding in an unstable surface like doing a move on a balance board or bosu.

And while these are ways to create instability and force muscles to really activate more and work harder to stay balanced, instability can also be created through taking a bilateral, or two leg or arm movement and making it a unilateral or single leg or arm exercise.

Exercises can be included all along that continuum from two sided to one sided as well based on our exact needs and goals and even to use progression through the same but different.

For example, you could do a two legged deadlift variation, an 80/20 variation, a slider variation, a bench variation, a hand assisted variation and then a full single leg deadlift.

And even if you can do the full single leg, you may use these others to create more or less stability based on the loads you have. Even combining two forms of resistance as you vary the stability demands!

You’ll even notice how other tools besides just an unstable surface, like the sliders, can add instability.

So don’t be afraid to get creative even using things like the suspension trainer or bands to add a little stability challenge to moves!

#4: Adjust Load Placement.

Load placement, or how you hold the weights or resistance, can not only challenge different muscles to different extents, but can actually be another way to create instability as well.

An uneven or offset load, holding two different weights, or a weight on just one side, can really challenge your core especially to stabilize and work.

Where you hold the weight can help you progress moves to target different areas without necessarily going heavier too.

Consider the goblet position, holding a weight up at your chest to work your core more during a lunge over down at your sides.

Even load just one side to work those obliques and fight that rotation and lean.

And on lower body moves, like reverse lunges or step ups, holding the weight in the opposing hand can even help you focus on targeting those glutes more.

But varying where you are placing the weight can create a new challenge to help you build muscle and strength!

#5: Change Up The Tempo Of Moves.

This can mean pausing and holding in moves, it can mean slowing them down or even speeding them up based on your goal for the exercise.

But adjusting the pace at which you do moves can really have an impact on whether you’re even working to build power or strength.

And both improving your strength and your power can help you build muscle overall.

Don’t be afraid to even use different tempos throughout the move.

You may slow down the lower down in a pull up, but return to the top quickly. You may even add in pauses at different points in the move to work on weaker areas.

Slowing down the eccentric especially, or the part of the move where the prime mover muscle is lengthening, can not only lead to greater muscle gains but even allow you to do a move advanced variation of an exercise than you otherwise would be able to.

And this can help you further build strength. I love using it especially to build up moves like push ups or pull ups!

#6: Spend More Time Under Tension.

Tempos really have an impact on your time under tension, but I wanted to mention time under tension, and specifically more time under tension as its own form of progression for a reason…

Because you can also impact time under tension through range of motion and even workout design.

With time under tension, you are getting a muscle to spend more time working.

Slowing down the tempo of a move makes a muscle work for longer, but so can adjusting the range of motion, both increasing it but also shrinking it.

In moves like even the Get Up Lunge, you’re increasing the range of motion of a basic lunge to go all the way down to the ground, but you’re also shrinking it in that you’re not standing up at the top.

So your legs never completely get a break. They’re in that working range of motion the entire time. And this can create a great challenge without you adding heavier and heavier loads.

Even adjusting workout design to combine moves or use intervals of work, which I’ll go over more in tip 8 can have an impact!

But getting those muscles to work hard for longer can help you increase that challenge!

#7: Switch Up Postures and Positions.

Simply adjusting the posture or position you are doing an exercise from can dramatically change the challenge of it and even the extent to which you feel muscles working.

We don’t realize how much we can often use other muscles or even seek out mobility from other areas to assist.

So even changing up an overhead press from standing to seated may make us have to check our ego and even go lighter with weights.

Changes in our posture can even help us target different aspects of a muscle.

Like a glute bridge and curl is going to hit our hamstrings in a different way than a deadlift because we are working the muscles by moving at different joints.

So don’t be afraid to vary how you’re doing those same basic moves or even consider how to include different exercises to target the same muscles!

#8: Vary Your Workout Design.

We can often get very “married” to specific ways of programming.

I often see people wanting their body part splits over the weeks and workouts with one move done in isolation.

Or they need specific intervals or circuits.

But we need to realize that sometimes varying up our reps, sets, rest intervals and such can really impact how we’re challenging our bodies.

Especially when you don’t have heavier weights, consider timed intervals of work to help you push past failure and do those few extra reps.

Consider even back to back intervals working the same area but with one move that is compound and one that is isolation.

This combination of isolation and compound can even be key if you don’t use intervals but do count reps and sets.

While we may often do a superset when we have heavier weights to allow one area to rest as the other works, sometimes doing back to back moves for the same muscle group can help us work it closer to fatigue when we don’t have heavier weights to challenge ourselves.

Don’t be afraid too to use different rep ranges. If you can challenge yourself for 6 reps great, but if you then have another move that you need 15 or even 20 reps to feel add up, don’t be afraid to use both rep ranges even in the same series!

But realize that how you adjust exercise order and even use different rep and set designs can have a huge impact!

#9: Increase Training Density.

How we design our workouts can also have a huge impact on our training density. But I think it is key to note this as a form of progression on its own.

Because training density is the amount of work you can complete in a certain amount of time.

And often to try to do more volume of work (more reps and set), our workouts just get longer and longer.

But this doesn’t have to be the case.

While we don’t just want to cut out rest from our workouts and turn our strength training into cardio and we don’t want to just add more reps and sets when we don’t have weights to create more fatigue, we can use training density to our advantage to see results.

Because often when we are training with lighter loads, a greater volume of work is needed.

This is also why workout design is so important to consider. Doing even things like timed supersets, compound sets or circuits, or Density Training, can be key to helping you get in more work without increasing time.
Your goal is to use harder variations and basically move more weight but without increasing time and through this create progression.

So consider each week how you can do a harder variation or another rep but in the 10-15 minutes you’ve set for that series!

#10: Adjust Your Workout Schedule.

Many of us may have grown up seeing those body part split workout schedules where each day you work a different area.

But not only have studies shown that more frequently working an area, 2-3 times a week, can be beneficial, but the more you don’t have loads to challenge you, the more you do want to use volume of work, or even training density to your advantage.

And this isn’t just in a single workout, but even something to consider over an extended timeline of a week.

If you are training with limited tools or struggling to build an area, consider adjusting your workout weekly split.

Consider more full body workouts or even hemisphere, dividing routines into upper and lower workouts.

You can even do anterior/posterior splits focusing more on those frontside vs. backside muscles in routines.

But vary what you’re including in your workouts to create that progression, even down to using different tools, different moves, different tempos, all of these other forms of progression, over the week to see results!

Remember we can create a challenge and see better results through not just adding weights but using these other 10 forms of progression! Which will you include in your workouts for a new challenge?

Want amazing workouts you can do anywhere? Check out my Dynamic Strength program…

–> LEARN MORE

15 Tips to Build Muscle

15 Tips to Build Muscle

by | Aug 4, 2024 | Blog, Diet, Exercises

Struggling to see the muscle gains you want?

Stop blaming your age.

Stop blaming your genetics.

While these things impact how we may design our workouts and diet to help us achieve results, they are within our power to address.

Because the real reason we aren’t seeing the results we want is because a system is off.

There isn’t one magic move or food that will make everything work.

It’s all the components of your plan that work together.

An amazing move or workout routine done with improper fueling will lead to lackluster results.

A perfect diet can’t create progression in your training.

So if you aren’t seeing results, stop blaming things outside your control and instead take a step back to look at your lifestyle and make small adjustments to meet yourself where you are at so your lifestyle is moving you forward.

Here are 15 reasons why I often see clients not achieving the muscle gains they want.

And I will tell you…some of these you are mentally going to resist because they are things that “worked” in the past.

They may have been key to us achieving our weight loss or fat loss goals even.

But what works to get us to one goal may not only not work to get us to the next…

It may even hold us back!

Not to mention, our body and needs change over time.

And this actually brings me to the very unsexy first reason we don’t see the muscle gains we want…

We think it should be easier to see results because we’re an experienced exercise.

While you may feel it should be “easier” to see results because you’re an advanced worker-outer, this will actually make your progress SLOWER.

So recognize that change takes time and the more you have a foundation already built, the more small tweaks can have an impact.

You’ve adapted to more. It’s why you’ve gotten stronger and fitter.

But this also means that details matter more!

Get ready to embrace changes if you want to focus on those muscle gains…

And one of the surprisingly most common reasons I see clients not achieving the muscle gains they want is…

They’re not eating enough.

There can be a slight fear about eating more when you’ve just lost weight.

This is why increasing your calories after a weight loss phase has to be a slow process of even just 100 calories added to your daily intake and maintained for weeks before further increases.

You need to retrain your body to eat more.

But in this process of eating more, you are supplying your body with the extra energy it needs to not only train hard to build muscle but also support that muscle growth.

Not only does increasing muscle mean you need to eat more to maintain that newly added muscle, but there are other changes with increasing calories that actually mean your body uses more calories even at rest.

If you are struggling to build muscle, it may be time to increase your calories even if you aren’t feeling hungry.

We have to remember that hunger cues are partly TRAINED from even previous dieting practices.

So to build muscle, track and increase those calories slowly.

You can’t stay in a calorie deficit and efficiently build muscle especially if you’re at your desired leanness level. And even as you then see the scale creep up with muscle being gained, you may need to increase your calories further.

You may also have to let go of specific meal timings – such as fasted training.

The more advanced a trainee you are, the harder it gets to build muscle.

And as we get older, we are less able to build and retain lean muscle as well.

These aren’t excuses, they’re just facts that can and need to be addressed.

And besides making sure you’re eating enough, this may mean adjusting your meal timing.

The fasted training that used to work, may not be giving you the immediate fuel your body needs nor helping you create that anabolic environment for muscle growth.

And I say this as a person who really loves to train fasted at times. BUT…what works for one goal or stage of life doesn’t always work for another.

To be able to train harder and help your muscles recover better, you may need that pre-workout snack with especially some carbs. Having full energy stores can be key.

So consider even just breaking your fast with a small snack prior to your training session if you really want to see those muscle gains.

Now you may be thinking, “No! I’m low carb! I’m not giving up fasting and adding more carbs!”

But this carbphobia may be holding you back.

While low carb can be helpful for some during a weight loss phase, especially during menopause, carbs really do help create that hormonal balance and anabolic environment for muscle growth.

They give you the immediate fuel your body otherwise has to work hard to get from fats or protein so you can truly push hard and work at the intensity you need to create progression in your training.

Because we NEED to feel energized if we want to train hard to build muscle. Working at a zapped 100% intensity just isn’t going to drive growth efficiently especially if we’ve trained for decades and have adapted to a great training stimulus.

Before I move into some workout mistakes often holding clients back, I wanted to highlight one more nutritional piece which is so key…

PROTEIN.

Our body is made up of protein and the protein we consume isn’t just used for building muscle.

If we don’t prioritize getting enough, not only will our muscles not have the fuel they need to rebuild and grow, but our hard training sessions may actually be leading to muscle loss, especially the more cardio they are (which I’ll touch on next).

Because our muscles are also our biggest reserve of amino acids. So if your body feels it needs amino acids for other functions or to recover from your training sessions, you may actually be turning to your muscle…

Which completely defeats the purpose of your training sessions in the gym.

So make protein at each meal you eat a priority. And don’t fear increasing protein portions per meal to even up to 40 grams.

This can be key as we are less able to utilize protein as efficiently as we get older so getting MORE is needed to create the same stimulus for muscle growth.

Now going back to why cardio may be hindering your muscle gains…

There are two issues I see popping up with clients and how they include cardio in their workouts…

One they’re putting cardio first in the session.

And two, they’re simply doing too much steady state cardio.

If you love your cardio workouts, your long bike rides or runs, I’m not telling you not to do them. But you also need to know the COST of these sessions if you’re frustrated by not building muscle.

Because that steady state cardio at that intensity greater than walking is more catabolic to muscle mass and will often leave you depleted for your strength sessions.

It’s kind of like taking one step back for every two steps forward.

You can still move forward, you’re just making it harder and really have to tweak your fueling and other strength workouts to account for that.

So if you want the fastest results, cut back on your steady state cardio workouts and mileage for a bit, don’t turn your strength workouts into cardio by cutting out rest and time any cardio you do on days between that won’t fatigue you for future workouts or AFTER your strength session.

While you may put cardio first in your day if you’re training for a race, what you put first gets you when you’re freshest.

You want to be freshest for your lifts!

And being fresh and energized for each session is key because you need to create true progression in your strength workouts to see results.

Driving muscle growth means you’re going to feel uncomfortable, both mentally and physically.

You need to push hard and even at times push to a true failure. You need to keep progressing moves whether through loads, tempos, variations, perfection in form, volume…week over week.

This is incredibly taxing at times and may lead to you needing a deload week at points because you’re even just mentally feeling burned out from the strain.

But too often I see clients just pushing till it feels “hard” but never really pushing their comfort zone.

They stop at 12 reps not because they had to, but because it felt hard enough and that was the top end of the reps given.

NOPE! You’ve got to at points fail with a weight or variation to truly test those limits if you want to build muscle faster and know your pushing!

So get ready to feel uncomfortable.

But just note…uncomfortable doesn’t just mean feeling destroyed or sore from every workout.

Actually constantly feeling beat down or constantly seeking to be sore may be why you aren’t seeing the muscle gains you want.

Because soreness isn’t an indicator that a workout was hard enough or that we’re going to see better muscle gains.

While muscle tissue damage is one driver of muscle growth and can lead to muscle soreness, it isn’t the only driver of muscle growth.

And if you’re following a clear workout plan and progressing week over week, you shouldn’t always be sore from the calculated progress.

Honestly often we are so sore because something isn’t CORRECT in our plan.

We’re…

  • Not fueling well so we’re not truly rebuilding from our training.
  • We’re not including proper recovery work so that our muscles have that time to repair and rebuild stronger.
  • We’re not creating a clear progression that we repeat week over week but just randomly stringing together new things. And new alone will make you sore while actually not driving that progressive overload to see results.

So stop just seeking to be sore and instead follow a clear plan where week over week you can make incremental changes.

And jumping around too much is a very common mistake I see clients making.

It’s easy to want to chase something better, especially when we see all these new and exciting things on social media promising faster results.

But we get good at what we consistently do.

We need to have a weekly schedule we repeat week over week so we can truly track progress.

Don’t allow yourself to get distracted. Create that clear plan and repeat it, working in new things over time.

But constantly jumping around keeps you stuck starting over again and again never achieving the build needed for results.

Now here’s the important flip side to that…you also can’t get so married to one type of training, one type of move that you don’t at points change things up.

At some point, you can’t just keep adding weight.

At some point you do need a new training technique or exercise to create progression through the same but different.

So set those end dates where you adjust your training progression over just continuing to cling to what used to work.

Just because supersets worked in the past doesn’t mean 6-12-25 may not now be better since you’ve adapted to that other training stimulus.

So often we don’t see the opportunity in little tweaks like that, especially as we are more advanced and we can’t just keep adding loads to certain moves or training more frequently or for longer!

And one of those tweaks I see too often ignored for muscle building, and too often overused for fat loss, is isolation moves.

If you have a specifically stubborn area, you need to hone in on it.

While compound moves are amazing to help you burn more calories and be efficient in your training sessions while lifting more weight to drive muscle growth, areas that you struggle to gain in need the extra attention.

Isolation moves can help you really hone in and work an area to fatigue, recruiting more muscle fibers to help create that stimulus for muscle growth.

Isolation moves can be included in so many different ways whether you want to pre-fatigue a muscle, tiring out a harder to fatigue muscle slightly before a compound lift to be able to use lighter loads while working to failure…

Or use them to end your workout and fully fatigue one of the muscles worked during compound exercises earlier on.

But don’t ignore the importance of isolating stubborn muscles if you want to build muscle.

(If you’re looking for amazing workouts to help you build muscle and lose fat, check out my Dynamic Strength program…sorry shameless plug for these fun workouts you can do anywhere!)

Now the final reason I see clients not achieve the muscle gains they want is not valuing quality over quantity with everything they do.

So often we just seek to do MORE, use more supplements, implement more techniques, add on more we have to do or manage into our diet and workout plans.

Instead we need to get good at those basics.

We need to have that solid plan we follow and set end dates so we can assess and tweak.

And we need to focus on really perfecting the habits that we do.

Focus on the quality of your reps and what you feel working in your workouts.

Focus on hitting your macros consistently.

Don’t get distracted by supposedly magic pills or fancy tools that only add complexity.

Stay focused on your plan and get really good at doing it, improving week after week.

And while I know I gave you 15 reasons why you may not be seeing results…Don’t feel like you need to address all of them, especially all at once.

Find just ONE that you can adjust and dial that in first. Focus on getting really consistent with the change and then build off of that.

It will amazing you how simplifying and dialing in even just one of these habit changes with a focus on quality leads to faster muscle building results than you thought possible no matter your age!

For more workout and nutrition tips, join my newsletter!

–> Join The RS Newsletter

If You’re Not Building Muscle, Try These 5 Training Techniques

If You’re Not Building Muscle, Try These 5 Training Techniques

by | Jan 28, 2024 | Blog, Exercises, Workouts

We can’t out exercise our diet.

HOWEVER, while many of us have heard that diet is more important, I’d actually argue they both matter equally especially in that both need to work together.

And so often we don’t place enough importance on proper training because we’ve only seen our workouts as a chance to burn more calories.

But our training shouldn’t be about the calorie burn.

It should be about building muscle.

When we focus on better movement and building strength and muscle in our training, we create true muscle growth.

Without proper stimulus, no matter how you eat, you won’t build muscle.

So while our diet is especially important to lose fat, and important to make sure we fuel our training sessions to gain…

Our workouts have to be designed strategically if we want to improve our body composition.

And this honestly means going against what most of us have always done to lose weight…

Instead of more cardio, we often need less.

And we need to stop turning our lifting sessions into simply cardio workouts – cutting out more rest and adding a ton of volume.

Now note…I’m not telling you that cardio isn’t important to your health and that you can’t do it if you enjoy it…

I do want to make it clear that to build muscle so we can lose fat faster, we can’t default back into this cardio, calories, do more training mindset.

That’s why I want to share 5 training techniques to help you build muscle, which in turn will boost your metabolic rate and help you look leaner faster…

Training Technique #1: Focus on double progression.

If it challenges you, it will change you.

But just because your workout feels hard doesn’t mean you’re creating a consistent progression so your muscles have to adapt and grow stronger week after week.

That’s why it’s key we not only progress the movement, adding weight, slowing down the tempo, doing a harder variation, but also adjust our exact reps to create that week over week progression.

Using these two forms of progression to complement we can ultimately move more loads over our training sessions, resulting in faster and better gains.

Often when we have a workout there will be 8-12 reps listed.

Let’s say right now you’re doing 12 reps of front lunges with 20lbs dumbbells and you manage that for all 4 sets you have assigned.

It feels hard.

Good.

But you’re at the top of the rep range so next week, GO UP in weight or progress the move in some way.

If you can still do 12 reps that first round, go up in weight for that next step until you can’t do 12 reps.

Let’s say on your 3rd round, you hit 8 reps with 35lbs dumbbells. Maybe you stick there for the final round.

The next week instead of going up in weight, you try to get out 9 or 10 reps. Once you can again do 12 reps, you again want to go up.

This double form of progression is the perfect way to max out the loads you can lift with volume and truly make sure you’re challenging yourself to create that muscle growth!

Training Technique #2: Train areas more frequently with the same but different.

Studies have shown that training an area 2-3 times a week can be optimal for muscle growth.

This doesn’t mean do 1000s of reps multiple times a week. It means definitely dropping volume a bit per session to increase the frequency and spread it out.

This allows for often more QUALITY volume as you may notice you are fresher for all the exercises and sets spread out over more days over doing that same volume in one.

This also allows you to use a diversity of movements and tools to work the same muscles.

And this can be key because changes in posture and position alone can impact even what aspects of a muscle are worked.

For instance a Romanian deadlift works the hamstrings through hinging at the hips. A seated leg curl works the hamstrings with knee flexion with flexed hips while a bridge and curl works the hamstrings with knee flexion with extended hips.

All three are different postures that address different aspects of that hamstring muscle group. And including three different moves over the 3 days can be key for optimal gains.

So don’t repeat just the same move 3 times a week. Consider different types of movements, ranges of motion and even different tools!

Training Technique #3: Combine rep ranges in a single workout.

If you want to gain muscle, you want to use a variety of rep ranges combined.

This can not only help you build strength and improve your strength and endurance and recovery, but even target stubborn muscles and push them past failure to see better results.

Some of you may have seen my 6-12-25 workout progressions in previous YouTube videos and podcasts, but this design is so fabulous because it does include maximal strength, hypertrophy and strength endurance rep ranges in a single series – moving from compound to more isolation exercises.

This helps you get in that quality of movement while isolating those more stubborn areas.

So don’t fear higher reps. Don’t fear lower reps.

Include a diversity in a single session even.

But be conscious of the types of moves you use with each.

Often in our workouts we want to go more compound to more isolated, with heavier lower rep work first and the higher rep, more isolated work later to work a muscle fully to fatigue.

However, like in the 6-12-25 and even compound burners, you can use 2 or even 3 rep ranges combined to lift heavy for lower reps then right after isolate that muscle that is already fatigued to recruit more muscle fibers with higher rep work.

And note, while you will go “lighter” with higher rep work, you aren’t going light.

Especially when you are working with higher reps, to push yourself, consider using a weight or variation you have to pause to get out 5 more and hit in the middle or top of the range.

That need to pause and do 5 more past failure is so key to those amazing gains!

Training Technique #4: Do more timed workouts.

Too often when we want to lose weight, our workouts get longer and longer as we add in more and more.

But this often just burns us out and leads to a lot of wasted volume.

By doing intervals or work or even timed sets, we can increase our training density without our workouts getting longer.

We can focus on that quality work and create that density by just trying to do MORE in the time set out.

I find that often when I use intervals over having do count a certain amount of reps, I eek out reps I wouldn’t have done had I been able to stop at 6. I end up doing 8 because I have the time and have to work through it…even if I have to pause for a second.

I also find I’m focused and more intentional over just rushing through because I can’t finish any faster.

And when it comes to timed sets or circuits, like Density Sets, you can lower the reps and increase the weight and keep moving the entire time to actually lift more quality loads without your workouts getting longer.

So consider timed intervals of work or timed sets to help yourself really push with each rep over simply doing MORE.

Especially since so many of us complain we don’t have enough time, why not plan for what you have and really be intentional and focus on quality with every rep!

Honestly the only reason our workouts should ever get longers is because we have the time and do more mobility work OR have increased rest periods to lift heavier with lower reps or to do more high intensity true sprint work.

Workouts become longer because of recovery not because we’re doing more work!

Training Technique #5: Vary intensity of workouts and type of drivers.

For the best results, some workouts should feel easy. Not every workout should slaughter you.

Because if you don’t recover, you can’t train at a true 100% intensity.

Not to mention, if you’re tearing down muscles constantly, they can’t regrow stronger.

It’s a cut. If you’re constantly working and picking off the scab, it’s not going to heal back!

You’ve got to give it time to heal…although unlike a cut we do want to reopen the wound to make our muscle feel pushed to adapt more and more!

So over the course of your week, vary what areas you are working. Give muscles time to recover.

And vary the intensity of your workouts. This helps areas recover while still driving growth. And it also helps you MENTALLY stay focused and push hard when you need.

We can’t mentally make ourselves extremely uncomfortable every session or we will burn out. So having a workout or two each week that isn’t taxing, especially programmed on busy days, can actually help you get more quality work done overall for the week.

And those recovery sessions can help you move better in future workouts.

So vary intensity!

And this doesn’t just mean easy or hard workouts. It also means varying the types of movements and what driver of muscle growth you use as some create more muscle tissue damage and take longer to recover from.

For example, maybe one day you do a deadlift, another a hip thruster and the 3rd day you include only mini band work for your glutes.

These all use different drivers of muscle growth and allow you to train your glutes 3 times that week and go hard in each session without just constantly beating your body down!

So consider the types of movements you’re using and even the tools!

WARNING: Stop seeking to be sore.

I mean this because if you vary intensity and use different drivers or muscle growth, you won’t be sore all of the time.

GOOD!

Soreness is not an indicator you worked hard enough.

And while it can feel good and satisfying at times to know you pushed, not being sore doesn’t mean you didn’t work hard.

Honestly, you shouldn’t constantly be sore if you’re truly creating progression to build.

Over the weeks of your workout progression, you should feel like you can even do more, more easily without getting sore.

Because soreness is often just an indicator we did something new or different.

That we didn’t give ourselves enough recovery.

That we focused only on the eccentric and mechanical tension as a driver of muscle growth.

That we aren’t eating enough.

Or hydrating well.

Constant soreness actually means we’re probably not doing something we need to see results.

So focus on that clearly mapped out progression you repeat and track those numbers to see progress instead of just pushing to be sore!

Looking for amazing workouts to take your training to the next level and help you see fabulous body recomp results?

Check out my Dynamic Strength Program!

 

How To Build Muscle At Any Age (5 PROVEN Tips!)

How To Build Muscle At Any Age (5 PROVEN Tips!)

by | May 3, 2023 | Blog, Exercises, Functional Fitness, Workouts

If it challenges you it will change you. This is ultimately what building muscle at any and every age comes down to.

Whether you have heavy weights and tons of equipment or simply your own bodyweight you can create that challenge.

But there are 5 key training techniques and tips I want to share that can help you challenge your muscles in a way that forces them to grow as efficiently and effectively as possible.

And ladies, if you want to stay lean and strong as you get older, don’t fear those heavy loads! 

While diet is key to build muscle you need to make sure your workouts are designed to aid in muscle growth.

Here are 5 training techniques to improve your workout designs and help you strategically use moves to see results more efficiently.

Tip #1: Start your workouts with heavy compound lifts.

Start your workouts more global before you slowly hone in and isolate those more stubborn areas.

Include big compound movements like the deadlift or bent over barbell row to start your workout.

The heavier and more complex the lift, the more it benefits from us being fresher. 

The more fatigued we are, the more we can tend to compensate.

It’s not only our muscles but also our mind-body connection that can fatigue over the workout.

After the heavier lifts you can focus more on stubborn areas with lighter loads for slightly higher reps.

Tip #2: Use Rest-Pause Technique

This technique helps you build muscle by basically allowing you to work to failure multiple times in a set. 

This leads to great muscle activation and can help you break through a plateau.

You can actually even use lighter loads with this increase in volume and hit near failure because of how you’re adjusting your rest periods. 

While there are many ways to do this technique, the key is starting with a set to almost failure, then short rest periods of no more than 20-30 seconds max before completing another few sets. 

One of my favorite designs to include with a big compound movement is the 10-7-3-1 set.

Pick a weight that you can do for about 12 reps.

Do 10 reps with that weight. Rest for a 10 count.

Then do 7 reps with the same load.

Rest 7 seconds then do 3 reps.

Rest 3 seconds and then do a single rep of the movement.

This lets you do 21 reps with a weight you could technically do no more than 12 reps with. 

Tip #3: Include fast-paced power movements.

Part of why we can lift more is that neuromuscular-efficiency or the ability to recruit muscles to the correct extents efficiently to lift a weight or perform an exercise. 

That is why you may want to include a little explosive power work in your routines even if your focus is on building muscle. 

This is especially key as we get older as our reaction times tend to slow, putting us at an increased risk for falls and fractures.

You can add explosive work to start your workout or as interval work during a cardio day between lifting sessions. 

You aren’t just trying to get out of breath. 

Think lighter loads, lower rep ranges and training for speed. 

med ball slams, sprints and battle ropes are all great options.

Think all out explosive then stopping before your pace slows and resting till you are fully recovered. 

Intervals should be no more than 20 seconds with 3-5 times the rest!

Tip #4: Focus on total loads lifted.

Lifting heavier isn’t just about the weight you use for a single rep or even set.

So while yes, you want to use heavier weights for that set of lunges, it isn’t just that single set where you lifted heavy that pays off.

It’s about moving more weight in total during each training session and over the course of weeks and months.

More quality weight lifted overall is what really creates that muscle growth. 

Your Training density, or the amount of work performed in a certain amount of time is key. 

With Density Training, you’ll want to set a timeframe for your set – 10-15 minutes is usually good. 

Pick 2-3 heavy compound lifts to include per set and do 2-3 sets per workout. It’s best to do these for different areas so one area gets rest as the other works. 

For example you might pair Squats and Overhead Press together. Pick a weight you can do no more than 10 reps with at max.

Start with 5-8 reps of each movement so you feel like you have no more than 2 left in the tank when you put the weight down and change exercises. As you fatigue, instead of going down in loads reduce your reps. By the end you might only be doing 1-2 reps alternating back and forth.

You’ll do MORE reps with heavier loads over the 10-15 minute training time. 

That volume of weight moved over weeks and months adds up.

Tip #5: Focus on what you feel working.

What you feel working during an exercise is what is benefiting from the movement.

If you only feel your quads instead of your glutes during lunges you may find your quads are growing but not your butt isn’t despite all of the “glute work” you’re doing.

This is why you need to focus on consciously trying to contract the muscle and load it during a movement. 

By shifting your focus to trying to recruit and contract the muscle harder, you can actually even aid in better muscle growth for even the most stubborn of areas.

Focus on contracting a lagging muscle even before increasing loads as if you were trying to make it almost cramp.

You may even find that, if you struggle during compound moves, like lunges, to activate your glutes, that a little activation work prior to help establish that mind-body connection through a slight pump pays off. 

And don’t be afraid to vary postures or positioning during movements, for example using a slight bit more of a hip hinge when you lunge backward to help yourself better engage the muscles you want to target. Little movement variations and tweaks can pay off! 

Using these 5 training techniques you can take your programming to the next level and see more efficient muscle gains no matter your training experience!

Remember it isn’t just about lifting more or doing a right move, it is about making sure everything in our training is included with a purpose and helping us be intentional to make each and every session of the highest quality. 

For more tips to help you build muscle check out these 5 habit changes you will also want to make…

–> How To Build Muscle ( 5 HABIT CHANGES)

How to Force Muscle Growth (4 Tips)

How to Force Muscle Growth (4 Tips)

by | Jan 8, 2023 | Blog, Exercises, muscle-featured

Are you ready to improve your workouts and dial in your muscle gains?

Then you’ll love these 4 tips to help you design your workouts to build muscle faster.

In this video I’m going to share 4 training tips to help you design more efficient workouts for better muscle gains. Be open to the opportunity in these options over writing off what doesn’t fit what you’ve always done. 

Change requires change.

And because many of us realize that the best results happen when our diet and workouts work together, I’m going to share a bonus nutritional tip that will make some of you very mad…

Hey guys it’s Cori from Redefining Strength where we help you feel, look and move your best at any and every age.

Gaining muscle can be a slow process. And the more advanced a trainee you are, the slower the process will be. 

That’s why it is key we dial in our training, progressing it with these 4 key training tips. And not only do we need to adjust our diet, but making sure to fuel to create that anabolic environment is key. 

Tip #1: Use Two Types Of Resistances.

Which are better….bands, dumbbells, cables, barbells or kettlebells? 

The answer is all of them. And it depends.

But so often we get caught up in finding a single BEST tool over realizing that we can create progression by even combining them. 

Each of these types of resistances have different benefits. And when we combine them, we can utilize their unique benefits to our advantage. 

Especially because we need to really push that progression each workout to build muscle and get better results faster. BUT it can be mentally taxing to constantly be pushing.

And ego can start to get in the way, pushing us to do more weight than maybe we can truly control optimal just to do “more” this week and progress. 

That’s why varying up how you apply resistance can help from not only a physical standpoint, but also a mental one.

Consider combining tools like the barbell and bands. 

When you combine these two tools, you can not only more easily add loads with the barbell, but you can also benefit from the different resistance arc of the bands.

Bands can help apply more tension where the muscle is strongest and can help you apply more resistance not just dependent on the pull of gravity like free weights. 

And the two tools combined can allow you to use lighter barbell loads while making the move more challenging in a new way.

A great example of a way to combine two types of resistances is the Landmine Band Deadlift.

You can not only get the benefit of the loaded barbell in the landmine, but the band will also apply more resistance as you lift and really make you fight to control the eccentric or lower down. 

This is a great way to focus even more on that eccentric portion of the lift, or when those hamstrings are stretched, to create better muscle hypertrophy. Studies have shown that by emphasizing the eccentric portion of a move, you may be able to get more efficient muscle gains.

Tip #2: Use Training Density To Move More Weight.

What leads to more strength and muscle growth? Lifting heavier weight more times.

But the heavier the weight, the fewer the reps you can do in a row. 

The lighter the weight, the more reps in a row you can complete. 

You need to find that sweet spot to move more weight over the course of your individual sessions but also over time.

That is why advanced training techniques like density sets can be so key to include, especially if you are a hard gainer, have been training for longer or even just want to build muscle while being really conscious to avoid gaining unwanted fat.

A great density training design is 3 10 minute supersets, using heavy compound lifts, especially in the first two series. 

To use this design, you’ll pick two moves working different areas and repeat them for 10 minutes, pausing only briefly to rest as needed. 

You will use one move as a chance to rest the muscles worked in the other exercise.

You will also pick a load you can do about 8-10 reps with at max and then perform about 5-6 reps per set on it. 

This allows you to actually use heavier loads and build up volume over the time through completing multiple rounds. 

It also often allows for higher quality reps with heavier weights. 

You’ll be amazed at how much more weight you can actually move over the course of each workout with this design!

It is killer though so be prepared to cycle out of this design every 3-4 weeks.

Tip #3: Use Partial Reps.

Now before you get mad about this tip, let me break down the opportunity in changing up the range of motion at times, specifically for movements meant to isolate those stubborn areas.

I’m all for strengthening through the fullest range of motion possible as often as possible. This helps us maintain amazing mobility and stability even as we get older and see great muscle growth.

BUT more time under tension for a muscle has also been shown to truly lead to better results faster. 

This is why including some partial reps for those stubborn areas, reducing the range of motion can be helpful. 

And it can help in 2 ways….

1. It can allow more time under tension to emphasize the eccentric, like on Pulse RDLs where you are spending more time under tension when the muscle is stretched.

2. It can allow you to create more metabolic stress to also drive muscle growth by keeping the muscle in a consistently shortened state and apply more resistance at the end range of motion when the muscle is contracted. With this you’ll often feel that pump or burn building up, like top range of motion bicep curls. 

Another benefit is that it can help you overcome stick points in lifts, which can ultimately help you lift more weight, leading to better muscle gains as well.

Tip #4: Putting it all together. Create your progression.

I’ve heard people say they get “bored” by repeating workouts.

But your desire to be “entertained” and constantly do something new may be holding you back from seeing the results you want. 

If you want to build muscle, you need clear progression and the ability to recover between sessions.

Randomly stringing workouts and new moves together all of the time may make you super sore, feel hard and ultimately get you nowhere.

Create that clear progression based on those “boring” fundamentals.

And realize that by creating this clear progression, implementing the 3 prior training techniques here, you’re going to see better muscle gains faster.

This allows you to move, feel and look your best…which isn’t boring at all. 

Sometimes we have to remember that we are training to do more of what we love even outside the gym. 

Plus, find ways to enjoy the challenge of small weekly progressions and include a diversity of movements over the weeks to keep things interesting.

Then every 3-4 weeks assess where you’re at to then make some swaps and keep things from getting too stale!

Now…DUN DUN DUN…the tip some of you will hate….

Don’t Fear Carbs!

What you did to lose weight is NOT what you’ll need to do to build muscle.

If you loved low carb to trim down, you need to let go of any “carbphobia” if you want the best muscle building results. 

Carbs create that anabolic environment optimal for muscle growth, not only helping create the hormonal environment for growth but also by being that readily available energy to help muscles rebuild and grow.

If you don’t have enough fuel to allow your muscles to grow, you’re going to spend a lot of hard work and time lifting to not see the results you want. 

The more advanced and experienced an exerciser you are, the more you can’t ignore your diet and the importance of not only protein but CARBS.

Muscles need extra energy to grow!

If you are just starting out with your muscle gaining journey, consider even just bumping up your carb intake right post workout to refuel and replenish those depleted glycogen stores. 

And if you’re looking for even more nutrition and workout tips to help you build muscle faster, check out my 9 Tips For Faster Muscle Growth video to help you continue making those gains…

–> Watch The Video

And if you’re looking for someone to put together the full system you need to see results, adjusting your diet and your workouts to work together, click HERE to learn more about my fabulous 1:1 Online Coaching!