TAKE ACTION
a
M
TAKE ACTION
Target Your LOWER ABS – The Best Lower Ab Exercise You Aren’t Doing

Target Your LOWER ABS – The Best Lower Ab Exercise You Aren’t Doing

by | Mar 13, 2022 | Blog, Bodyweight, Core, Exercises, Functional Fitness, Workouts

Now my favorite comment I get any time I post anything to work the lower abs is…

“You don’t have lower ab muscles.”

And that’s true. There is no specific lower ab muscle.

But you CAN target that lower portion of your rectus abdominis to a greater extent with specific moves, especially bottom up exercises.

Just like you can target the upper portion more as well with more top down focused moves.

So if you’re looking to target that lower portion of your rectus abdominis while even strengthening your pelvic floor and TVA more, I want to share a movement variation I think is often under utilized.

But before I do I do just want to mention a few bonus tips to help you really achieve that lean, flat stomach.

That lower abdominal region is an especially stubborn one to lose fat from.

And 100% diet is key. And consistency in dialing in our macros past the point we often want to quit as losing that last little bit of stubborn belly fat is hard.

But if you truly are struggling with losing that last little bit, this tip may be the missing piece from your training routine.

And it does involve something we’ve been told is impossible….

Spot lipolysis aka SPOT REDUCTION! GASP!

Yup. You can spot reduce an area…not in the way we’ve always tried to, but it may be that key little tweak when you’ve got everything dialed in.

How do you do this?

Try including this underrated ab exercise, or an exercise for the stubborn area you want to target in your strength workout. Include it even as part of a finisher.

When we work a muscle, we mobilize more fatty acids from the surrounding tissues.

So if we do this focused ab work to mobilize the fatty acids in the surrounding tissues and then include low intensity steady state cardio after, we can utilize the mobilize fatty acids.

Aka we can help ourselves lose more fat from our lower abdominal region!

(For more on Spot Lipolysis, clic HERE!)

If you’ve been struggling with that last little bit of stubborn fat and want to strengthen your lower abs, try this Hanging Posterior Pelvic Tilt with Squeeze as part of your workout finisher even adding in a nice walk after to cool down!

How do you do the Hanging Posterior Pelvic Tilt with Squeeze?

Hanging leg raises and knees to elbows are both great lower ab exercises. Yet too often we use them in a way that only ends up overworking our hip flexors.

It’s because we ignore the essential component that makes any leg raise movement really target our lower abs – the posterior pelvic tilt.

That’s why I love this hanging ab exercise – because it focuses on that essential pelvic tilt component.

And by adding in the leg squeeze, which in turn engages your adductors, you can even help yourself better activate your pelvic floor and lower portion of the rectus abdominis.

To do this move, start hanging from the bar from a ball or block between your upper thighs right above your knees. Grip the bar hard with all of your fingers evenly and engage your back to help you stabilize, slightly depressing your shoulder blades.

Then, squeezing the ball or block, tuck your pelvis toward your ribs. You’re basically rounding your lower back.

Your legs will come forward but you do not want to really bend at the hips.

You’re using your abs, and even your glute max to perform that slight spinal flexion to tuck your pelvis under.

Squeeze the ball hard as you tuck.

Think about pulling your core in as you tuck. You’re not just drawing your belly button toward your spine but even thinking about pulling your pelvis in toward each other as you tuck toward your ribs.

To help you really brace, focus on that exhale as you tuck.

As you do this move, focus on that exhale to expel all the air you have and contract that core as you perform the pelvic tilt to feel your TVA even engaging as a corset around your middle to brace.

Really pause with each tilt to focus on engaging your abs as hard as you can before slowly relaxing.

To help you really avoid too much swing, grip the bar hard and engage your lats.

This is a very challenging move as simple as it may seem.

To modify the fully hanging variation, keep your toes down as you hang, even losing the block or ball squeeze to be able to better focus first on the tilt.

If you have any upper body issues or simply can’t yet fully hang and control the exercise, you can also modify by doing this off the ground, holding onto a pole overhead or on a bench holding onto the end.

To progress the move when you’re fully in control of the posterior pelvic tilt, you can keep the squeeze and start to do even the full knees to elbows. But only progress as you can fully control the move and feel that mind-body connection being used to create that ab shakeage!

SUMMARY:

Remember you need to focus on feeling your lower abs working to get the full benefit of this move. If you instead only feel your lower back or hips, you need to modify.

Sometimes we need to regress to progress!

The 3-Step Fat Loss Formula if you’re ready to reveal those abs…

–> 3-Step RS Formula

The Right Way To Get A Strong Lower Back (4 exercises)

The Right Way To Get A Strong Lower Back (4 exercises)

by | Feb 27, 2022 | Blog, Butt, Core, Exercises, Functional Fitness, injury-featured, Pain Relief

Many of us have thought to ourselves, “My lower back is so weak” when we’ve been suffering from lower back aches and pains.

We feel it during ab movements or deadlifts and think that we feel it because we need to strengthen it.

But what if the problem isn’t that your lower back is weak?

What if the issue is that it’s actually OVERWORKED?

This is all too often the case when it comes to our lower back.

The muscles there become overworked due to our daily postures which have created mobility restrictions and underactive abs and glutes.

So all of that strengthening you’re trying to do, all of those superman you’re doing, may actually be perpetuating the issues making them worse instead of better.

Instead you may need to be working on your hip and thoracic mobility while activating your abs and glutes to protect your lower back from being overloaded.

Remember the point of pain isn’t always where the problem started. And feeling a muscle work during a move may not be because it is weak. Instead it may be working when it shouldn’t and become overloaded.

So if you’ve been feeling your lower back during moves and thought, “I need to strengthen it,” try including these 4 moves in your warm up routine instead! And stop overworking your already overloaded lower back more!

Exercise #1: Thoracic Foam Rolling

If one area is lacking in mobility, we will seek out mobility from another area to compensate.

Because we often lack proper thoracic extension due to hunching over our technology or driving in our cars, we tend to compensate for this lack of extension by arching our lower back during exercises.

If you’ve ever felt your lower back during overhead pressing movements or bent over rows or back flyes, you may be arching your lower back in an attempt to maintain a neutral spine because of your limited thoracic extension.

That’s why it’s key we work to improve our thoracic extension to avoid seeking out mobility from our lumbar spine to compensate.

That’s why I love peanut foam rolling. It’s a great way to relax those muscles that may become tight along our spine while improving our thoracic extension.

To do this move, you can use a peanut, which can easily be made by taping two balls together or tying them in a sock. Lie on your back placing the peanut in your mid-back with a ball on either side of your spine.

Place your hands behind your head, pulling your elbows open as you relax over the peanut.

Breathe and hold for a second, then crunch up and relax back down. Do a few of the crunches, extending back over, before moving the peanut up your spine.

You can also reach your arms up overhead and sweep them open and out to your sides before crunching up to stretch out your chest further.

But focus on breathing to relax as you hold and allow your spine to extend over the roller.

To progress this move, you can use something like the Simple Mobility tool which has a larger diameter and will require more spinal mobility to relax over.

Exercise #2: Bench Hip And Quad Stretch with Rotation

Tight hip flexors, and a lack of hip and spinal mobility in general can lead to you overusing your lower back as you then aren’t able to properly engage your glutes or even your upper back and abs.

That’s why stretches to improve your hip extension and spinal mobility are key.

Too often if our hip flexors are tight, we end up feeling moves that should be felt in our glutes in our lower backs and quads. Not to mention we can develop hamstring synergistic dominance where our hamstrings start to become overworked instead of our glutes working when they should!

To address both limited hip and spinal mobility, I love this Bench Hip and Quad Stretch With Rotation.

To do this move, place one foot up on a bench or chair behind you and half kneel on the ground with that back knee down and front foot flat on the ground. Move out far enough that you can squeeze that back glute to drive your hip into extension while keeping that front knee aligned over that front ankle.

In this half kneeling position, place both hands down on the ground even with your front instep.

In this position it is key you squeeze that back glute to drive that hip into extension or you lose out on the hip flexor stretch. Having your back foot up on the bench flexes your knees to stretch your quads at the same time.

Then lift your hand closet to your front foot to rotate toward that front leg. As you rotate your chest open, don’t just move at your shoulder. Focus on engaging your upper back to rotate your chest open.

Reach up toward the ceiling then place that hand back down on the ground. Then lift your other hand up to rotate away from that front leg. You may find it harder to rotate one direction, especially away from the front leg.

Make sure to keep that back glute engaged the entire time to stretch your hips and engage your upper back to help you twist and rotate.

Do not let yourself rock out on that front foot and cheat, seeking out mobility from other areas!

Move slowly and work for about 30 seconds per side even before switching legs.

To modify, you can place your back foot on a block instead of up on a bench. You can also place that back foot on a wall if you don’t have a bench.

If you can’t kneel due to knee issues, do this from a runner’s lunge position, even modifying with your hands up on an incline.

Exercise #3: 3-Way Hip Circles

The best way to protect your back is to strengthen your glutes and your abs so they brace to help protect your spine so your lower back isn’t doing all of the work!

That’s why this 3-Way Hip Circle activation move is so important to include. It not only helps mobilize your hips, but also works on your core engagement, activating your glutes, abs and even obliques.

Avoid leaning away or rotating your pelvis as you focus on moving just at the hip joint.

In this drill you want to pause in each position as the donkey kick will target your glute max while the fire hydrant will target your glute medius and the knee tuck will engage both your hip flexors, but especially your abs if you focus on drawing in your belly button as you pull in to tuck.

By also fighting the urge to lean away you’ll feel those obliques working to keep your hips level toward the ground.

To do the 3-Way Hip Circles, start on your hands and knees with your hands under your shoulders and your knees under your hips. Flex your feet.

Then, keeping your knee bent to about 90 degrees, kick one leg back like into a Donkey Kick. You may slightly abduct the leg to better engage the glute, but do not let the knee rotate open. Focus on stopping the move with your glute over arching your lower back to lift up higher.

Pause here even assessing if you feel your glute. If you feel your hamstrings, relax your foot or even kick slightly out. And make sure your hips stay level to the ground.

Then, without bringing your knee back down, circle it out to the side into a Fire Hydrant position. Do not bend your arms or lean away to try to get the leg up higher.

Pull your knee in line with your hip, keeping your knee bent to about 90 degrees. Focus on keeping your lower leg about parallel to the ground. Do not let your foot flare up higher. Feel the side of your butt working to hold the leg up.

Pause here then tuck your knee straight in toward the elbow on the same side.

Pull your abs in as you crunch and don’t be afraid to flex slightly through your spine. Focus on those abs working as you drive your knee into your arms.

Pause then repeat the move kicking back into that Donkey Kick position.

Move slowly focusing on avoiding rotation or arching of your lower back as you kick back.

Complete all reps on one side before switching.

You can not only modify this move but also simply add variety to it and a balance challenge, by doing this standing. You can also do a straight leg kickback if you really struggle with arching your lower back or your hamstring compensating.

The key is making sure you actually feel the glutes working. Because doing the right moves, without feeling the correct muscles working may only perpetuate the problem over correcting it!

Exercise #4: Pelvic Tilt Balance March

Improving your pelvic stability to properly be able to brace your abs during movement is key if you want to avoid lower back overload and injury.

It’s why the Pelvic Tilt Balance March.

It is far from an easy move but it is a great way to engage your TVA or transverse abdominis while working your rectus abdominis and obliques to stabilize.

Just make sure you advance it slowly over rushing it.

You don’t want your lower back to take over or your hip flexors to be doing all the work.

To do this move, place a larger foam ball or pilates ball right under the top of your butt.

You want to balance on this ball, pressing down into it with your arms down by your sides, palms pressing into the ground.

Then bend your knees to about 90 degrees, bringing them into that tabletop position. Better to have them slightly out than to tuck them more into your chest as that will make it easier.

Balancing here, slowly touch one toe to the ground, fighting the urge to rotate. Raise that leg back up then touch the other toe down.

Focus on bracing those abs and not letting your abs dome out or your lower back arch. If it feels like too much, bring the ball up slightly higher.

To advance from here, you may bend your elbows or even raise one or both arms off the ground. This will give you less of a base to assist with stabilizing.

But only progress as you’ve earned it. Better to modify and really feel those abs working!

Move slowly with this move and even consider starting without the ball to master that posterior pelvic tilt progression if you haven’t!

SUMMARY:

Too often our lower back becomes overworked due to hip and spinal mobility restrictions and weak or underactive abs and glutes.

But because we consistently feel our lower back during moves, we assume it is actually weak and instead try to do more to work it.

This only perpetuates the problem.

So make sure you’re also working to improve those mobility restrictions while strengthening supporting muscles so your back doesn’t become overloaded.

Remember where the point of pain is isn’t always where the problem started! And injury doesn’t only mean an area is weak!

Use these 4 moves in your warm up, even just spending 30 seconds per move to start to help you avoid those lower back aches and pains!

Want more workouts, exercises and tips? Join my daily newsletter:

–> Join The RS Newsletter!

 

The Most Underrated BODYWEIGHT Leg Exercise

The Most Underrated BODYWEIGHT Leg Exercise

by | Feb 14, 2022 | Blog, Bodyweight, Butt, Exercises, Functional Fitness

Too often we only think about progressing movements to build muscle by adding loads.

However, you can build muscle by creating progression in other ways especially if you don’t have any tools at your disposal.

If it challenges you, it will change you.

So if you’re only training with bodyweight but want to strengthen your legs?

You’ll want to try this amazing move, and one of my favorite bodyweight leg exercises we often aren’t doing – The Airborne Lunge!

Before I go over how to do this move, I want to highlight other ways you can create progression without loads all of which can be done with this great lunge variation.

One, you can use unilateral movements over bilateral moves.

Two, you can create more instability, through changing the surface you’re performing the move on or even the base of support you have, such as doing a fully single leg movement.

Three, you can change up tempo. You can slow down the whole movement, parts of the movement or even speed the move up and make it more explosive. You can even slow down one part and speed up another. Or you can even add a pause or hold.

Four, you change up the range of motion you’re working through. Increasing the range of motion of a move can make it more challenging. It is also a great way to make sure you’re working to maintain the mobility you build through your other prehab work!

It’s key to remember we can find ways to progress movements and build strength and muscle even when we don’t have weights.

So if you’re training at home or when you travel and need to progress the basic bodyweight leg exercise, try this Airborne Lunge Variation.

It’s a great move if you even want to build up toward that pistol squat!

The Airborne Lunge:

The Airborne Lunge is a great bodyweight glute and leg exercise that can help you build up to that full pistol squat even with a more hip dominant movement pattern.

It is however a deceptively hard move.

To do the Airborne Lunge, stand tall and shift your weight to one foot, bending the other knee to bring your heel up toward your butt. You want to keep that foot pulled toward your butt so you only touch your knee down when you lower.

Then sit your butt back to hinge at the hips as you bend your standing knee to drop your back knee down toward the ground. You will lean forward as you hinge, but do not round over. You are leaning forward to counterbalance your weight and sit back.

Touch your knee to the ground gently without letting that raised foot touch down.

Do not reach that raised leg back too far or you will get too spread out. Your standing knee may travel over your toes. This is NOT a bad thing and this ankle mobility is required to build up toward the full pistol squat. Just make sure you’ve pushed your butt back to load your glutes while keeping that standing foot, and especially your heel, firmly pressed down into the ground.

Lightly touch your back knee down, then drive back up to standing. Do not push off that knee or the raised foot.

You want the entire movement to be powered by that standing leg.

Stand tall at the top and squeeze that standing glute. Try not to touch the other foot down.

Repeat the move again, sitting your butt back to hinge as you bend that standing knee to lower down.

The range of motion on this move and the instability of the unilateral movement make it a challenge. To progress it further, you can increase the ROM, by performing the lunge with your standing leg up on something so you have to sink deeper.

Or you can change up the tempo, slowing things down, even pausing at the bottom.

However, you can also modify this movement by reducing the range of motion and touching your knee down to a block or box. You can also reduce the instability by holding on to something to help you balance.

But this unilateral move is a great way to build strong legs and glutes, correct imbalance and progress your bodyweight training WITHOUT adding loads!

And it’s a great way to perform a more hip dominant exercise that can help you even build up toward that full pistol squat as well!

SUMMARY:

Just remember, if it challenges you it will change you. Muscle growth and strength increases come from forcing our muscles to adapt to a challenge!

My Most Hated Video – Stop Exercise Shaming!

My Most Hated Video – Stop Exercise Shaming!

by | Feb 8, 2022 | Blog, Exercises, Functional Fitness

You know why there are so many different perspectives out there in fitness?

Because there are a ton of different things that can work based on your needs and goals.

Are some of them a bit far out there and only work for those rare few?

Yup. But as my husband was told growing up because of his weird approach in baseball, “You don’t tweak the freaks.”

Now while I’m not encouraging you to go find the strangest thing possible to test, I do think it is key we start to embrace the opportunity in different perspectives and see these differing opinions as a chances to learn and improve.

Over simply demonizing moves or opinions as wrong.

I can’t tell you how many times early on I “wrote off” a cue or training technique because it didn’t fit the “tribe” I was in at the time.

This ultimately held me back from becoming as strong and as fit as I could be as efficiently as possible.

It’s why I can deadlift more now than when I won the MA/RI State Powerlifting Championship.

It’s why I’m leaner now than when I fought tracking and focused only on “eating clean” and restricting arbitrary foods.

We need to seek to learn and even challenge our own perspective with differing opinions. This is the way we can find little tweaks to make to help ourselves personally improve and create the Frankenstein program right for us.

Because ONE SIZE DOESN’T FIT ALL.

Now I bring this up because of the interesting comment chain I read on my Underrated Arm Exercise.

Let’s get one thing straight about what creates results and helps you build muscle…

If it challenges you, it will change you.

Heavier loads are only ONE way to create progression and muscle hypertrophy.

Muscles grow stronger and bigger in response to a challenge that forces them to adapt.

Time under tension using different tempos, changes in range of motion, changes in tools used, changes in the exact movement pattern and your postures, all can create a new stimulus and challenge for your muscles.

And all of these can force your body to have to adapt and grow.

Progression can be simply created from doing the SAME BUT DIFFERENT!

And that’s why I love that amazing arm exercise.

It isn’t just a bicep move. It isn’t just a basic tricep extension. It isn’t just an overhead press.

It works your entire arm in one movement.

And there are so many ways you can vary and tweak it to match your specific needs.

Now I wanted to address a few “concerns” people raised to hopefully share a different perspective on things and help guide you to determine if this move has benefit to YOU personally…

First concern…

Now what if one muscle is weaker and limits the weight you can use?

Many people mentioned that one of the muscles involved was stronger than the others so that they felt like they needed to use different weights on each move to truly challenge each muscle group.

There is definitely ALWAYS a limiting factor in movements. It is why for especially stubborn areas, as I mention in the full video, you may at times still include isolation exercises.

However, these same people vilifying this move because a muscle required for the movement may be stronger than another also love bench press and do push ups and pull ups and squats.

In all of these compound, multi-joint movements, there is a limiting factor. Be it your shoulders or triceps or chest on bench, something impacts the loads you can move.

It doesn’t still mean you don’t get results from it and that you can’t create progression to create hypertrophy.

Not to mention the actual technically ideal strength ratio between your triceps and biceps SHOULD be 1:1. So if you have a huge difference between the two that is actually something you may want to work on.

And it is probably based on what you’ve trained or utilized more.

Technically the triceps accounts for around 55% of upper arm muscle mass, while the biceps takes up about 30%. While many mentioned their biceps being stronger, this is likely due to preferential training.

And although the triceps are a bit bigger than the biceps, both are equally important. As antagonists, an equal strength ratio can be key.

So maybe more of us need moves like this that force us to work BOTH muscle groups more evenly.

Not to mention both the triceps and biceps play an important role in our overall shoulder health. Why not work them at the same time we also get the benefits of an overhead press!

And instead of simply writing this move off because one area is stronger so the weight doesn’t challenge it as much, why not tweak the exact version of the move you do?

You could slow down the tempo, especially of the eccentric portion of the exercise component you wanted to make more challenging.

You can do an extra rep in that piece of the movement even, performing two curls to one overhead tricep extension.

And on top of all of this, we have to remember that our hypertrophy goals may all be different. Not all of us are training for a bodybuilding competition nor super experienced lifters.

We may not need to use isolation moves to truly challenge those muscles. 

It’s why we need to understand that different moves may be right for different training experiences and goals!

Now the second concern…

Why use a hybrid movement?

It seems like a lot of people confused what a compound movement is for a hybrid movement.

To get the best results, I believe we need to use a diversity of movements.

While compound moves are the most time efficient and key for overall functional strength as you’re working more muscle groups at once, for those stubborn areas that sometimes need extra focused work, isolation moves are key.

If a client comes to me wanting to really build muscle, but short on time, I may completely forgo any isolation movements to start. We want to think “bang for their buck” in their workouts.

However, a more advanced lifter who has an area that refuses to grow or change. Maybe you opt for a progression focused on more isolation movements than you would usually do.

The key is you’re embracing the options.

Same goes for hybrid movements – which are movements that combine multiple different movements into a single flow.

A hybrid movement CAN have isolation exercises included.

A bicep curl is still an isolation exercise for the bicep even if you combine it in a flow with an overhead press (which is a compound movement) and then an overhead tricep extension (another isolation movement).

So by doing this flow you aren’t wasting any time doing a bicep curl then a tricep extension.

You’re also getting in the BONUS of an overhead press which works not only your shoulders but also your triceps before that overhead tricep extension.

More time under tension for those muscles! You’ll be surprised by how much you feel that burn adding up!

Another benefit of hybrid movements is the increased energy demands because you are working more muscles in a short amount of time. Especially when usually you’d be doing say 8-12 reps of just a very isolated movement. This can be good to get more benefit in less time if you’re trying to keep your training sessions short!

While you may be thinking why not just superset tricep extension and bicep curls? You have to consider the change in rest you’ll actually be giving the areas. While yes it is only one curl to one overhead extension, the rest between each is shorter than doing your 10 reps of curls before your 10 reps of tricep extensions.

Not to mention you’re then not working in that overhead press at all!

I also called this an UNDERRATED arm move not the BEST arm exercise or the best tricep or bicep move. This move hits the entire arm which you can’t say about those other isolation moves. Not to mention underrated means not valued highly enough, which I believe this move clearly isn’t.

And often the people not seeing the value, haven’t even tried it.

So instead of writing it off, like I feel far too many have done, try it to actually SEE whether it benefits you. You may be surprised.

Now…even with all of this you may decide the move is not “underrated” as an arm exercise (note I didn’t say bicep or tricep or shoulder exercise, but arm exercise).

You may not include it. But why not see opportunity in this movement to allow yourself to be open to options and improve your training.

You may find at some point it does come in handy…I can’t tell you how many times something I decided not to use I’ve brought back in special circumstances or with a client who really needs it.

Think about this…

What if you only have one weight?

Not everyone has a whole gym full of weights.

This is a great way to make use of that one weight in a time efficient matter if someone has 20 minutes to train and wants to spend most of their workout on those key compound lifts and movements.

What if an area IS stronger, but someone likes the look of this move?

Why not even hold in one position as the other arm goes through the movement? You could hold a curl halfway up as the other arm goes through for added bicep work.

SUMMARY

Instead of just writing a move off…Why not find ways to even TWEAK the basic move? Whether it’s changing tempo, making it a unilateral move, adding in holds…There are so many ways we can adjust moves to match our needs and goals.

We have to remember that not everyone has the same needs or goals or even training situation and experience.

So instead of just writing a move off, why not learn who or when it could benefit someone? You may find it ends up being the missing piece to your training!

Too often I see the same people who are labeling moves as bad or pointless, struggling to achieve the results they want. And it’s because they aren’t open to new perspectives, instead sticking by the mantra of their fitness tribe.

Don’t hold yourself back from achieving the results you want. Be open to progression through the same but different. See opportunity in different ways of doing things even if they aren’t right for your needs or goals!

Want more amazing Redefining Strength workout tips, exercises and macro hacks?

Subscribe to my free daily newsletter!

–> Join The RS Newsletter

 

4 Common Exercises You’re Doing Wrong

4 Common Exercises You’re Doing Wrong

by | Jan 23, 2022 | Blog, Bodyweight, Core, Exercises, Functional Fitness, Pain Relief

Just because a move is “good,” or a key movement pattern to perform, or something really frequently included as a staple in many routines, doesn’t mean you deserve to do it.

Every movement variation has to be earned.

And doing a harder variation we can’t truly control or utilize to the fullest will actually hold us back. It won’t allow us to get as much out of the exercise and our workouts as doing an “easier” exercise actually could.

Often, if you do a move actually modified to your current needs and goals, you may feel the muscles being worked harder because everything is engaged correctly.

That’s why I wanted to talk about 4 exercises that are often in programming that people aren’t maximizing – 4 moves we don’t fully give them credit for being the challenging exercises they actually are.

And not only do I want to go over the reason to use these moves but the common mistakes I see people making and also the modifications we should be using instead to EARN these harder variations!

Exercise #1: Balance Lunges or Bulgarian Split Squats

The balance lunge or Bulgarian split squat is an amazing unilaterally-focused leg exercise.

Yet so often we aren’t really getting the true benefit of our back foot being raised up on a bench or in a suspension trainer.

While yes, the automatic instability of raising that back foot up does make it more challenging no matter what, the true point of putting your back foot up is to increase the range of motion you are working through.

Yet so often we place our foot up on something only to repeat the same range of motion we would when doing a split squat off the ground!

Sometimes the range of motion is even smaller actually because we aren’t stable and haven’t yet learned how to control the full split squat movement.

And on top of that, so often because we “can do” the move, we start to even add loads and completely miss out on the full benefit of this variation.

We have to remember that loads are not the only way to progress an exercise.

And that, if you’re going to include the Balance Lunge, you need to make sure you can utilize the increased range of motion. That is what creates the progression and benefit of this movement.

From there you can add loads, change tempos and even use different ways of creating that extended range of motion to adjust instability.

But you need to utilize the full range of motion first.

If you can’t work through the full extended range of motion, you may want to start with a lower bench or box to reduce the mobility and stability demands. Slowly increase the range of motion instead of just jumping to a bench.

You may even find right now you struggle to fully come to the ground during the basic split squat.

If that is the case, start with a basic split squat, even starting the movement from the ground to fully have to learn to control the complete range of motion!

Exercise #2: Double Leg Lowers

Double leg lowers have become an extremely popular ab exercise. But so often we end up feeling our lower backs or hip flexors over really targeting our abs.

In an attempt to correct this and do this harder variation we haven’t earned, we place our hands behind our lower backs and butts.

But this is a band aid. It doesn’t teach us to actually control the ab brace we need so we can build up.

It’s why we may need to regress to progress.

Because leg lower type movements, while they WILL work your hip flexors, are a great way to target that lower portion of the rectus abdominis more or what we often refer to as the “lower abs.”

And knowing how to brace correctly to protect your spine as you flex and extend your hips is also beneficial as you work to improve your heavier lifts!

So if you find your lower back engaging or only your hip flexors working, you can modify the double leg lowers in a few different ways.

But the key is learning to engage your abs using that posterior pelvic tilt.

This is a small movement that engages your abs and glutes.

Think about tilting your pelvis toward your ribs. Hold here as you do any movement in the progression whether it’s a single knee tuck, really taking things back to back to basics, double knee tuck or even single leg lower.

Only progress to the next level if you can maintain that ab brace and not feel your lower back taking over!

And if you do find you fatigue once you’ve built up to the double leg lowers, don’t push through. Instead modify with one of these variations so you can continue to target your abs.

Because we have to remember that the muscles we feel working are the ones getting the “benefit” of the movement. And if the correct muscles aren’t working we may be perpetuating recruitment patterns that lead to overload and injury…not to mention don’t actually work the muscles we want to target!

Exercise #3: Burpee

Love them or hate them, the burpee is often a staple in workout routines.

While many of us do recognize it is hard, it requires a lot more strength and mobility than we recognize.

And because the purpose of the burpee is almost always to be “cardio,” in an attempt to go as fast as possible, the quality of the movement often suffers.

We end up doing the worm during the push up portion. Or shrugging our shoulders in the plank. Or we land with our knees completely straight after performing a half-hearted jump at the top.

And sometimes, in an attempt to modify, we step back, but then to stand up, we end up having to do these stutter steps to bring our feet into our hands because we don’t have the mobility to truly step in far enough.

The burpee is a killer bodyweight move. And if you plan to include it, you need to earn it.

While yes, you can use the step back to reduce impact if you do have the range of motion to control the movement…and while yes, you can take out the push up to modify it as well so you don’t end up doing the worm, if you want to truly build up to that full burpee, try instead using an incline.

If you’ve been working to improve your push ups and build toward that full perfect push up from our toes, you may have been using an incline. And if you aren’t, start!

The incline can be a great way to reduce the load on our upper body and core so we can perform the push up correctly.

The incline also reduces the mobility demands during the burpee. It takes a lot more mobility than we realize to jump back in to efficiently stand up. Because your hands are raised, you need less hip and ankle mobility to jump back in and stand up.

As you feel comfortable with this move and can move quickly while performing quality reps, you can then lower the incline over time!

Exercise #4: Single Leg Glute Bridge

The bodyweight glute bridge may seem easy, but it’s a move that is so often done incorrectly. And then so often, before we’ve really earned it, we switch to the single leg glute bridge.

We may try to use the single leg glute bridge to get some unilateral benefits and work each side independently, but we have to recognize that it is a big jump in progression from the basic bodyweight glute bridge.

So before we even try the single leg variation, we need to make sure our glutes are actually powering the basic glute bridge. We don’t want our hamstrings or lower back compensating instead.

We don’t want to barely be able to lift up and trying the single leg variation or arching up super high because we’re hyperextended our lower backs.

A few key cues to help you better engage your glutes during even the basic bodyweight glute bridge are…

1. Before lifting perform the posterior pelvic tilt, tucking your hips toward your ribs. Maintain this throughout the bridge and don’t let your lower back arch to lift up higher.

2. Drive your knees toward your toes as you lift so you don’t push yourself backward and end up using more hamstring.

3. Engage your upper back, bending your elbows to drive your upper arms into the ground so you can focus on that pure hip extension.

Once you can control that basic glute bridge, you can then move into an 80/20 variation. This will allow you to focus more on one side or the other while still having a bit of assistance.

We have to remember that the full unilateral or single leg glute bridge isn’t just us having to lift all the weight on one side, but it is also us having to stabilize our pelvis and balance.

While still a simple move and bodyweight, it is more of an advancement than we give it credit for.

That’s why the 80/20 variation can be a good in-between so we can actually target each side while still working through a full range of motion targeting the glutes.

As you do feel ready to progress, just make sure your hamstrings and lower back aren’t engaging and taking over. This move is powered by your glutes!

SUMMARY:

Every move we include in our workouts should be done with a purpose. And we should only advance moves as we EARN those harder variations.

Sometimes, as much as it can hurt our ego, it is key we regress to progress and build up.

We are never above those basics and, at times, taking things back a step can help us improve any weak links!

Ready to take your training to the next level and dial in your workouts and your nutrition to match YOUR specific needs and goals?

Apply to my 1:1 Coaching. Book your strategy call below…

–> Apply Today

 

The Most Underrated Dumbbell Glute Exercise

The Most Underrated Dumbbell Glute Exercise

by | Jan 16, 2022 | Blog, Butt, Exercises, Functional Fitness

I’ve never been a fan of the whole squat for a better butt thing. I think squats are honestly overrated as a glute move, but that’s a video for another day.

And while I do think you need a diversity of movements to really get the best results for any muscle group, I wanted to share one of my favorite dumbbell glute exercises that I think is often forgotten about and overlooked.

It’s the Dumbbell Skier Swing.

The kettlebell swing is an amazing hip hinge exercise to work on that explosive glute power or even your strength endurance based on how you implement it.

It’s not only a great move to improve your conditioning but also your strength.

But if we don’t have a kettlebell, we often then don’t think about utilizing this amazing move.

That’s why I wanted to share a great way to use dumbbells to perform a swing and include this great move in your routine!

However I do just want to mention, before breaking down this movement, how key it is we learn to hip hinge correctly first.

Often swings are blamed for lower back pain. And while swings are NOT bad for your back, they do require core control and proper recruitment patterns during hip hinging to make sure they don’t result in overload or injury.

Because of the fact that they are a more explosive, faster paced movement, you do want to make sure you can properly load those glutes and hamstrings and brace your abs during hip hinging before you included this exercise.

Remember that when you are performing a hip hinge, you are NOT simply leaning forward.

The hinge should be initiated by sitting your butt back as if reaching your butt back toward a wall behind you.

And then, while your knees may soften, you aren’t focused on active knee flexion. You do not want to turn this into a squat.

Feel those glutes and hamstrings load and avoid arching your lower back in an attempt to keep your chest up. Brace your abs and think a nice neutral back.

Focus on this hip hinge as you introduce the swing and do not let your arms try to take over or the speed cause you to shift your weight forward so you aren’t properly loading your posterior chain.

How Do You Do The Dumbbell Skier Swing?

To do Dumbbell Skier Swings, stand with your feet about hip-width apart. Hold a dumbbell in each hand down by your sides.

Start by slightly swinging your arms back toward the wall behind you. As you do, hinge over in response to help balance and build up that spring to propel the weights forward as you stand up.

You will lean forward as you push your butt back to swing the weights up outside your hips. You are leaning forward only in response to help counterbalance your weight.

As you hinge over, your knees should be soft. Focus on pushing your butt back, but not on squatting down.

Then drive the ground away as you squeeze your glutes to explosively come back up to standing, propelling the weights forward and up.

Focus on that exhale as you propel the weights up to further help you brace your abs.

Straighten your legs as you stand tall at the top, squeezing your glutes to extend your hips. Watch your urge to lean back at the top as this can load your lower back.

Let the weights swing up propelled by your legs. Do not try to pull them up higher with your arms. They may come to shoulder height or slightly below but do not focus on the height.

To protect your back and control the move, be patient and wait for the weights to come back down and force you to hinge back over and sit your butt back.

You do not want to hinge over before the weights truly lower down as this can cause overload of your lower back.

As you hinge back over with the weights swinging back outside your hips, your torso will lean forward to counterbalance.

Think about being explosive with each drive back up to standing to propel those weights up as you are patient with the hinge back over to reload. You aren’t slowing the weights down with your arms, you just are only hinging over in response to the weights.

If you’re struggling with the explosive hip hinge and controlling both weights, you may start with a single dumbbell even held between your legs in both hands. This will more closely mimic the basic kettlebell swing.

Using two dumbbells in this skier style swing can be a great way to go heavier though if limited by the weights you have especially.

If you find you struggle with loading your glutes and the weights get too far away from your body causing your lower back to become overloaded as you hinge, you can also start with a Band Hip Hinge.

This move is a great way to learn how to explosively perform the hip hinge while really targeting those glutes.

The pull of the band backward will also help you control that hip hinge to load your glutes while teaching you to truly sit back!

SUMMARY:

If you’ve been looking for a great strength and conditioning move to target those glutes, and even your hamstrings, but don’t have a kettlebell, give this Dumbbell Skier Swing a try!

Just remember to focus on what you feel working so you get the full benefit of every exercise you include!

Learn to train according to YOUR needs and goals.

Book a call to learn how Redefining Strength can help you dial in your workouts and your nutrition for better results faster…

–> Book A Call